Boondoxxx Mud Pits

Mud Bog Rules

· Must have Helmet Snell 95 Approved or DOT approved Helmet in all classes

· Must wear a fire Suit if running alcohol.

· Must have clevis on back of vehicle. If you forget your clevis, you may rent one for a $15.00 deposit. If you return it, you will get your $15.00 back provided you return it on the day of the event.

· Classes 1 thru 4 are allowed 1 passenger only, and the passenger must wear a seat belt and a helmet

· Class 5 thru 10 are not allowed a passenger.

· All exhaust must be turned away from the spectators

· Must have 4 entries to make a class, less than 4 entries is 100% pay out only.

· Only the Driver will get in free to an event, all others are considered spectators and will pay the spectator fee.

· Driver can only enter 1 time in each class

· Trucks can enter in the same class twice, provided the vehicle has a different driver. The vehicle can only claim one place regardless of the different driver.

· All drivers must be ready when called to the line, you will have a 2 min hold, then be disqualified.

· If you vehicle breaks down and are unable to compete in the class, please let the officials know, you will not be refunded Moines

· Be aware of our motocross riders, leave trucks in teh pit unless competing or going to the wash area.

· No fighting, weapons or drinking allowed. If you appear to be under the influence of drugs or alcohol, pit officials will not let you compete.

· Every truck will have a tech sticker for the class (s) they run in, this could result in a one time $10 fee.

· Profanity is not allowed. Any arguments or fowl mouths towards officials will result in disqualification. No Moines will be refunded to you.

· Trucks are subject to be teched at any given time

· No Nos or alcohol injection hats unless competing in the DOT Unlimited or Outlaw Class or Tractor Tire Class

· Driver seat must remain in factory location except in classes 7-10

· No carburetor pumped alcohol in classes 1-4

· No paddle tires in any class

Class # 1 ~ Street Stock (0-38 DOT Tires)

· No open headers

· Must have front windshield

· Must pull no less than 15lbs of vacuum @ 1000 RPM’s, Vacuum on Carb

· OEM Body, Frame and Suspension Matching

· OEM Transfer Case

· No Pinion Brakes

· Fuel Injection motors only on year models that are factory equipped

· Must wear Snell 95 or DOT Helmet

· Must wear seat belt

· Stall converter OK

· Must be able to pass registration and Inspection within 1 day.

· (Pit Official / Pit Tech will pull vacuum on places 1^st thru 3^rd at their description)

Class # 2 ~ Street Stock (38.5 -44 DOT)

· No open headers

· Must have front windshield

· Must pull no less than 15lbs of vacuum @ 1000 RPM’s.

· OEM Body, Frame and Suspension Matching

· OEM Transfer Case

· No Pinion Brakes

· Fuel Injection motors only on year models that are factory equipped

· Must wear Snell 95 or DOT Helmet

· Stall Converter OK

· Must wear seat belt

· Must be able to pass registration and Inspection within 1 day.

· (Pit Official / Pit Tech will pull vacuum on places 1^st thru 3^rd at their discretion)

Class # 3 ~ Limited Modified (0-35 DOT Tires)

· 500 C.I. Limit

· No Sheet Metal or Tunnel Ram Intakes

· No Dominators or Multiple Carburetors, Single Carburetors only

· No Injection, Blower, Turbo, Supercharge unless OEM Stock

· No 3 or 4 Links, Ladder Bar, Slider, Coil Overs, performance shocks, or coil springs unless OEM Stock.

· 36 inch maximum none adjustable traction bar allowed on rear only

· Engine must be within 2” from centerline of the front axle to the #1 side face of the head

· OEM Iron Block and Heads Only

· No after market block or unconventional or aluminum heads (only in factory OEM setup-No body, frame or motor changes)

· No Lenco, SCS or power glides

· Stall Converter OK, No trans-brake, electric shift or air shifters allowed

· Must have two functional brakes, Pinion brakes OK

· OEM Frame only (No tube or homemade frames)

· OEM Vehicle Body (No sheet metal bodies)

· Fiberglass hoods OK

· Must have full windshield

· Body trimming OK (tire clearance only)

· Radiators and Battery may be relocated, but not in the cab (Battery must be in a battery box)

· Mini Trucks and Mini small block maximum

· Full Size Trucks (small or big block)

· No Quick change or open chain drives Tran. Case

Class # 4 ~ Limited Modified (36-39.5 DOT Tires)

· 505 C.I. Limit

· No Sheet Metal or Tunnel Ram Intakes

· No Dominators or Multiple Carburetors, Single Carburetors only

· No Injection, Blower, Turbo, Supercharge unless OEM Stock

· No 3 or 4 Links, Ladder Bar, Slider, Coil Overs, performance shocks, or coil springs unless OEM Stock

· 36 inch maximum none adjustable traction bar allowed on rear only

· Engine must be within 2” from centerline of the front axle to the #1 side face of the head

· OEM Iron Block and Heads Only

· No after market block or unconventional or aluminum heads (only in factory OEM setup-No body, frame or motor changes)

· No Lenco, SCS or power glides

· Stall Converter OK, No trans-brake, electric shifters or air shifters allowed

· Must have two functional brakes, Pinion brakes OK

· OEM Frame only (No tube or homemade frames)

· OEM Vehicle Body (No sheet metal bodies)

· Fiberglass hoods OK

· Must have windshield

· Body trimming OK (tire clearance only)

· Radiators and Battery may be relocated, but not in the cab (Battery must be in a battery box)

· Full Size, Mini Trucks and SUV small or big block allowed

· No Quick change or open chain drives Tran. Case

· No Gutting (You can have min. dash gutting, and you can cut finder wheels for tires only)

· You must have a functional bed with a floor

Class # 5 Unlimited Modified (0-39.5 DOT Tires)

· 532 C.I. Limit

· Must have OEM Body (Gutting Allowed)

· Fiberglass Front Clips OK

· Carbureted Alcohol allowed, No Multiple Carburetors

· No open Chain Drive

· Must have two functional brakes, Pinion brakes OK

· U-Joint Shield required unless using pinion brakes

· Drive shaft loops 1 per shaft located forward of centerline of shaft

· Kill switch located at drivers reach and at rear left drivers side of the vehicle

· No aluminum block or unconventional heads (only in Factory OEM setups)

· No tunnel Rams, Injections or superchargers

· No multiple carburetors

· No Pro modified trans. No Lenco or SCS

· Trans. Blanket and Flywheel shield required unless SFI Approved Case

· No 4 Links

· OEM Frame Only

· Windshield required

· Engine must be within 6” from centerline of front axle to the #1 side face of head

Class # 6 Unlimited Modified (40-44 DOT Tire)

· Any OEM Frame and Body

· OEM Suspension Only: (No coil over, 4 links or adjustable shocks) Ladder bars and Lift Kits OK

· Any OEM Production Vehicle Engine (532 C.I)

· No unconventional heads (alum. Heads OK)

· No Tunnel Rams, Dual Carbs, Sheet Metal Intakes

· Race Fuel, Carbureted Alcohol and Pump Gas Allowed

· No Fuel Injection, Blowers, Turbo, Supercharger unless OEM Equipped

· No Aluminum Blocks, unless it came in the vehicle for that year.

· Any OEM Differentials, transmission, transfer case. (No after market profab, SCS, etc)

· Fiberglass front clips OK

· Must have 4 point min. Roll Cage

· 4 Pt. Min Safety Harness

· Body Trimming OK (Tire clearance only)

· Must have a usable bed floor

· Lexan Windshield OK

· Flatbeds must meet OEM Dim.

· Drive Shaft Loops 1 Loop per drive shaft

· Engine must be within 2” from centerline of the front axle to the #1 side face of the head

· No center steering

· Window netting if not side windows

Class # 7 Super Modified (0-44 DOT Tire)

· 609 C.I. Limits

· OEM Frame and Body Only

· Gutting Allowed

· Carbureted alcohol allowed

· No open chain Drive

· Trans Blanket and Flywheel shield required unless SFI approved case

· U-Joint Shield Required unless using pinion brakes

· No pro modified trans, no leno, SCS

· Drive shaft Loops 1 per shaft located forward of centerline of shaft

· Kill switches located at drivers reach and at rear left drivers side of the vehicle

· No aluminum block or unconventional heads (only in factory set up)

· No tunnel rams, injections or superchargers

· Engine must be within 6” from centerline of front axle to #1 side face of head

Class # 8 DOT Unlimited

· Must have full appearing body

· OEM Frame Rails

· DOT approved Tires (No cuts, paddles or Tractor Tires)

· Gutting Allowed

· Any Engine and Suspension

· No Blowers, Turbo or Superchargers

· Drive shaft loops 1 per shaft located forward of centerline of shaft

· Kill Switch located Beside Driver and at rear left drivers side of the vehicle

· U-Joint Shield required unless using pinion brake

· Must wear a fire suit

· No passengers

· Must wear a 5 point harness

· Must wear a Snell 95 or DOT Helmet

· Hats and NOS allowed

· Min 6 point Roll Cage

Class # 9 Outlaw

· No Paddle Tires

· No Passengers

· Min 6 point roll cage

· Must wear a fire Suit

· Must wear a Snell 95 or DOT helmet

· Must have a kill switch at drivers reach and at rear left drivers side of the vehicle

· Must have a 5 point harness min.

· Must have a fire extinguisher at drivers reach

· OEM Frames Only, Full Body Appearance

· Windshield Optional, however must wear a full face helmet if no windshield

· Must have transmission blanket

· Must have drive shaft loops on front and rear shaft

Class # 10 Tractor Tire- 54 inch min.

· No Passengers

· Must have a 6 point full roll cage

· Must wear a 5 point safety harness

· Must have a Snell 95 or DOT Helmet

· Must wear a fire suit

· Must have a fire extinguisher at driver reach

· Must have a kill switch at drivers reach and at rear left drivers side of the vehicle

· Must have 4 tractor tires on vehicle

· Must have transmission blanket

· Must have drive shaft loops on front and rear shaft

[Boondoxxx Mud Pits] [Contact] [Directions] [Mud Bog Info] [Rules] [Sponsors] [Redneck Mud Bog]